- ただし
- ルートパーティションのマウントは`ufs:/dev/mmcsd0p2'
- ターミナルはxterm
root@kazu:~ # cu -s 1500000 -l /dev/cuaU0 Connected U-Boot TPL 2020.07 (Oct 08 2020 - 09:46:37) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 \ Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 \ Size=2048MB 256B stride 256B stride lpddr4_set_rate: change freq to 400000000 mhz 0, 1 lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM Returning to boot ROM... c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` \ `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` \ +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` \ -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- \ /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / \ [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- \ [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- \ `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ \ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | \ |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | \ |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | \ | || | | |[7;2H |_| |_| \___|\___||____/|_____/|_____/ \ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome \ to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. \ Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader \ prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: \ Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: \ default/[32mkernel[39m (1 of 1)[19;5H7. Boot \ [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] \ to boot or any other key to stop [25;0H[23;4HAutoboot in 9 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 8 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 7 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any \ other key to stop [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any \ other key to stop [25;0HLoading kernel... /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc \ data=0x19b3c0 data=0x0+0x53ffc6 \ syms=[0x8+0x116910+0x8+0x13b60e] Loading configured modules... can't find '/boot/entropy' can't find '/etc/hostid' Using DTB provided by EFI at 0x80ec000. ---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, \ 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 11.0.0 \ (git@github.com:llvm/llvm-project.git \ llvmorg-11.0.0-0-g176249bd673) WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. module firmware already present! real memory = 4158365696 (3965 MB) avail memory = 4029157376 (3842 MB) Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) Starting CPU 4 (100) Starting CPU 5 (101) FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic \ random device because it was not yet seeded and the knob \ 'bypass_before_seeding' was enabled. random: entropy device external interface MAP f3ef6000 mode 2 pages 1 MAP f3ef9000 mode 2 pages 2 MAP f6f30000 mode 2 pages 16 WARNING: Device "kbd" is Giant locked and may be deleted before \ FreeBSD 13.0. kbd0 at kbdmux0 WARNING: Device "openfirm" is Giant locked and may be deleted \ before FreeBSD 13.0. ofwbus0: <Open Firmware Device Tree> clk_fixed0: <Fixed clock> on ofwbus0 simplebus0: <Flattened device tree simple bus> on ofwbus0 rk_grf0: <RockChip General Register Files> mem \ 0xff320000-0xff320fff on ofwbus0 rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem \ 0xff750000-0xff750fff on ofwbus0 rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem \ 0xff760000-0xff760fff on ofwbus0 rk_grf1: <RockChip General Register Files> mem \ 0xff770000-0xff77ffff on ofwbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 regfix2: <Fixed Regulator> on ofwbus0 regfix3: <Fixed Regulator> on ofwbus0 regfix4: <Fixed Regulator> on ofwbus0 regfix5: <Fixed Regulator> on ofwbus0 regfix6: <Fixed Regulator> on ofwbus0 regfix7: <Fixed Regulator> on ofwbus0 regfix8: <Fixed Regulator> on ofwbus0 regfix9: <Fixed Regulator> on ofwbus0 regfix10: <Fixed Regulator> on ofwbus0 regfix11: <Fixed Regulator> on ofwbus0 simple_mfd0: <Simple MFD (Multi-Functions Device)> mem \ 0xff310000-0xff310fff on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on \ ofwbus0 gic0: <ARM Generic Interrupt Controller v3.0> mem \ 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff \ irq 18 on ofwbus0 its0: <ARM GIC Interrupt Translation Service> mem \ 0xfee20000-0xfee3ffff on gic0 rk_iodomain0: <RockChip IO Voltage Domain> mem \ 0-0xff31ffff,0-0xfff on rk_grf0 rk_iodomain1: <RockChip IO Voltage Domain> mem \ 0-0xff76ffff,0-0xffff on rk_grf1 rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff \ irq 71 on rk_pinctrl0 gpiobus0: <OFW GPIO bus> on gpio0 gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff \ irq 72 on rk_pinctrl0 gpiobus1: <OFW GPIO bus> on gpio1 gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff \ irq 73 on rk_pinctrl0 gpiobus2: <OFW GPIO bus> on gpio2 gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff \ irq 74 on rk_pinctrl0 gpiobus3: <OFW GPIO bus> on gpio3 gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff \ irq 75 on rk_pinctrl0 gpiobus4: <OFW GPIO bus> on gpio4 rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on \ ofwbus0 iicbus0: <OFW I2C bus> on rk_i2c0 rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on \ ofwbus0 iicbus1: <OFW I2C bus> on rk_i2c1 rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on \ ofwbus0 iicbus2: <OFW I2C bus> on rk_i2c2 syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on \ ofwbus0 iicbus3: <OFW I2C bus> on rk_i2c3 rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz \ quality 1000 Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality \ 1000 rk_tsadc0: <RockChip temperature sensors> mem \ 0xff260000-0xff2600ff irq 35 on ofwbus0 rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff \ on rk_grf1 rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff \ on rk_grf1 rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff \ on rk_grf1 rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem \ 0-0xff76ffff,0-0xffff on rk_grf1 rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem \ 0xff7c0000-0xff7fffff on ofwbus0 rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem \ 0xff800000-0xff83ffff on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpufreq_dt0: <Generic cpufreq driver> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpufreq_dt1: <Generic cpufreq driver> on cpu1 cpu2: <Open Firmware CPU> on cpulist0 cpufreq_dt2: <Generic cpufreq driver> on cpu2 cpu3: <Open Firmware CPU> on cpulist0 cpufreq_dt3: <Generic cpufreq driver> on cpu3 cpu4: <Open Firmware CPU> on cpulist0 cpufreq_dt4: <Generic cpufreq driver> on cpu4 cpu5: <Open Firmware CPU> on cpulist0 cpufreq_dt5: <Generic cpufreq driver> on cpu5 pcib0: <Rockchip PCIe controller> mem \ 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on \ ofwbus0 pcib0: Gen1 link training timeouted: 0x00080001. pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 0.0 on pci0 pcib0: failed to reserve resource for pcib1 pcib1: failed to allocate initial memory window: 0-0xfffff pci1: <PCI bus> on pcib1 rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host \ Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on \ ofwbus0 rockchip_dwmmc0: Hardware version ID is 270a rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host \ Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on \ ofwbus0 rockchip_dwmmc1: Hardware version ID is 270a mmc0: <MMC/SD bus> on rockchip_dwmmc1 sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem \ 0xfe330000-0xfe33ffff irq 12 on ofwbus0 rk_emmcphy0: got emmcclk clock sdhci_fdt0-slot0: Hardware doesn't specify timeout clock \ frequency, setting BROKEN_TIMEOUT quirk. sdhci_fdt0: 1 slot(s) allocated mmc1: <MMC/SD bus> on sdhci_fdt0 ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 \ on ofwbus0 usbus0: EHCI version 1.0 usbus0 on ehci0 ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 \ on ofwbus0 usbus1 on ohci0 ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 \ on ofwbus0 usbus2: EHCI version 1.0 usbus2 on ehci1 ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 \ on ofwbus0 usbus3 on ohci1 rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq \ 77 on rk_dwc30 xhci0: 64 bytes context size, 32-bit DMA usbus4: trying to attach usbus4 on xhci0 rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq \ 78 on rk_dwc31 xhci1: 64 bytes context size, 32-bit DMA usbus5: trying to attach usbus5 on xhci1 iicbus0: <unknown card> at addr 0x22 iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on \ ofwbus0 uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on \ ofwbus0 uart1: console (1500000,n,8,1) spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 iicbus2: <unknown card> at addr 0x82 iic2: <I2C generic I/O> on iicbus2 iicbus3: <unknown card> at addr 0x44 iic3: <I2C generic I/O> on iicbus3 pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 pwmbus0: <OFW PWM bus> on pwm0 pwmc0: <PWM Control> channel 0 on pwmbus0 pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 pwmbus1: <OFW PWM bus> on pwm1 pwmc1: <PWM Control> channel 0 on pwmbus1 gpioc0: <GPIO controller> on gpio0 gpioc1: <GPIO controller> on gpio1 gpioc2: <GPIO controller> on gpio2 gpioc3: <GPIO controller> on gpio3 gpioc4: <GPIO controller> on gpio4 gpioled0: <GPIO LEDs> on ofwbus0 cryptosoft0: <software crypto> Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 5.0Gbps Super Speed USB v3.0 usbus5: 5.0Gbps Super Speed USB v3.0 ugen2.1: <Generic EHCI root HUB> at usbus2 uhub0 on usbus2 uhub0: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> \ on usbus2 ugen1.1: <Generic OHCI root HUB> at usbus1 uhub1 on usbus1 uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> \ on usbus1 ugen0.1: <Generic EHCI root HUB> at usbus0 uhub2 on usbus0 uhub2: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> \ on usbus0 ugen4.1: <Synopsys XHCI root HUB> at usbus4 uhub3 on usbus4 uhub3: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> \ on usbus4 ugen3.1: <Generic OHCI root HUB> at usbus3 uhub4 on usbus3 uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> \ on usbus3 ugen5.1: <Synopsys XHCI root HUB> at usbus5 uhub5 on usbus5 uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> \ on usbus5 mmcsd0: 8GB <SDHC SA08G 4.3 SN 3177653E MFG 01/2020 by 2 TM> at \ mmc0 20.0MHz/4bit/2048-block GEOM: mmcsd0: the secondary GPT header is not in the last LBA. mmcsd1: 63GB <MMCHC DA4064 0.1 SN A84EEF0E MFG 07/2019 by 69 \ 0x0000> at mmc1 25.0MHz/8bit/65535-block mmcsd1boot0: 4MB partition 1 at mmcsd1 mmcsd1boot1: 4MB partition 2 at mmcsd1 mmcsd1rpmb: 17MB partition 3 at mmcsd1 Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT \ ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> Instruction Set Attributes 1 = <> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 \ 32> Processor Features 1 = <> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit \ ASID,1TB PA> Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 \ Breakpoints,PMUv3,Debugv8> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install \ [ro,noatime]... Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT \ ICache,64 byte ERG,64 byte CWG> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit \ ASID,1TB PA> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT \ ICache,64 byte ERG,64 byte CWG> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit \ ASID,1TB PA> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT \ ICache,64 byte ERG,64 byte CWG> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit \ ASID,1TB PA> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT \ ICache,64 byte ERG,64 byte CWG> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit \ ASID,16TB PA> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT \ ICache,64 byte ERG,64 byte CWG> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit \ ASID,16TB PA> WARNING: WITNESS option enabled, expect reduced performance. Unresolved linked clock found: clkin_gmac GEOM: diskid/DISK-3177653E: the secondary GPT header is not in \ the last LBA. uhub1: 1 port with 1 removable, self powered uhub4: 1 port with 1 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usbus2 uhub2: 1 port with 1 removable, self powered uhub0: 1 port with 1 removable, self powered ugen2.2: <vendor 0x05e3 USB2.0 Hub> at usbus2 uhub6 on uhub0 uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr \ 2> on usbus2 ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 ukbd0 on uhub1 ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, \ addr 2> on usbus1 kbd1 at ukbd0 Root mount waiting for: usbus2 uhub6: 4 ports with 4 removable, self powered ugen2.3: <Sonix Technology Co., Ltd. USB Camera> at usbus2 mountroot: waiting for device /dev/ufs/FreeBSD_Install... Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. Loader variables: vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install vfs.root.mountfrom.options=ro,noatime Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:zroot/ROOT/default cd9660:/dev/cd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> ufs:/dev/mmcsd0p2 Trying to mount root from ufs:/dev/mmcsd0p2 []... Warning: no time-of-day clock registered, system time will not be \ set accurately No suitable dump device was found. Starting file system checks: /dev/mmcsd0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0p2: clean, 34409 free (2009 frags, 4050 blocks, 0.9% \ fragmentation) GEOM: diskid/DISK-3177653E: the secondary GPT header is not in \ the last LBA. Mounting local filesystems:. /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). Setting up harvesting: \ [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED \ Feeding entropy: dd: /entropy: Read-only file system dd: /boot/entropy: Read-only file system . Building /boot/kernel/linker.hints kldxref: can't create /boot/lhint.I6nrHs: Read-only file system ELF ldconfig path: /lib /usr/lib /usr/lib/compat devmatch: Can't read linker hints file. lo0: link state changed to UP Starting Network: lo0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Starting devd. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. eval: cannot open /dev/ttyv0: No such file or directory eval: cannot open /dev/ttyv0: No such file or directory devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. devmatch: Can't read linker hints file. add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Updating motd:. Updating /var/run/os-release done. Starting syslogd. Clearing /tmp (X related). Mounting late filesystems:. Starting local daemons: Welcome to FreeBSD! Please choose the appropriate terminal type for your system. Common console types are: ansi Standard ANSI terminal vt100 VT100 or compatible terminal xterm xterm terminal emulator (or compatible) cons25w cons25w terminal Console type [vt100]:xterm -
ということでFreeBSDのインストーラがちゃんと立ち上がりました:-)
-
とりあえずmmcsd1にインストール
- でも何故かmmcsd1boot0とmmcsd1boot1があるが…
- mmcsd1boot0⇒idbloader.img？
- mmcsd1boot1⇒u-boot.itb？
- でも何故かmmcsd1boot0とmmcsd1boot1があるが…
-
順調にインストール
- 何の反応も無し
root@kazu:~ # cu -s 1500000 -l /dev/cuaU0 Connected
- まぁ，当たり前というか
- そもそもeMMCにはu-bootがインストールされてなかった;-|